Canon i-SENSYS MF8180C Driver Download For Windows, Mac, Linux | If you are looking for the best office printer that will not cost you a lot of money for the electricity bills, then Canon i-SENSYS MF8180C is one excellent printer that you need to have. That is because this printer is considered as one nice office printer. As an addition to that, the power consumption of this printer is also considerably low so that you will not need to worry about your electricity bills.
The wattage that you need when you are running this printer is average. That is because you will need about 1200 watt for the first time when you turn on or plug the Canon i-SENSYS MF8180C to the main power plug. However, you will not need to worry about that since the power consumption will gradually decrease after that.
For the standby mode, this printer will only need the maximum of 35 watts for its main operation. To make it better, you will only need about 5 watts when the printer is in the sleep state. That means, the power consumption of Canon i-SENSYS MF8180C is similar with one small bulb in your house. That will be something cheap to pay if you are thinking about the electricity bills.
Canon i-SENSYS MF8180C Operating System Compatibility
Windows 10 / Windows 10 (x64) / Windows 8.1 / Windows 8.1 (x64) / Windows 8 / Windows 8 (x64) / Windows 7 / Windows 7 (x64) / Windows Vista / Windows Vista (x64) / Windows Me / Windows 2000 / Windows 2003 / Windows 2008 / Macintosh / Mac OS Sierra 10.12/10.11/10.10/10.9/10.8/10.7/10.6/10.5 )
Canon i-SENSYS MF8180C Specification
|Machine type||Colour Laser All-In-One|
|Available Functions||Print, Copy, Scan and Fax|
|Print speed||Up to 4 ppm colour (A4)
Up to 19 ppm mono (A4)
|Printing method||Colour laser beam printing|
|Print quality||Up to 2400 x 600 dpi with Automatic Image Refinement|
|Print Resolution||600 x 600 dpi|
|Print margins||5 mm-top, bottom, left and right|
|Toner saver mode||Yes|
|Copy Speed||Up to 4 cpm colour (A4)
Up to 19 cpm mono (A4)
|First Copy Output Time (FCOT)||Colour Approx. 45 seconds or less
Mono Approx. 21 seconds or less
|Copy resolution||Up to 600 x 600 dpi|
|Copy modes||Text, Photo, Text/Photo|
|Multiple Copy||Up to 99 copies|
|Reduction / Enlargement||50-200% in 1% increments|
|Toner saver mode||Yes|
|Scan resolution||Optical: Up to 1200 x 2400 dpi
Enhanced: Up to 9600 x 9600 dpi
|Colour Scanning Depth||48 bit/24 bit (input/output)|
|Compatibility||TWAINÂ¹ , WIAÂ¹|
|Max. scan width||216 mm|
|Modem Speed||Super G3 33.6kbps (Up to 3 seconds/pageÂ¹)|
|Receive mode||Fax only, Fax/Tel Auto Switch, Answer Mode, Manual RX|
|Fax Resolution||Standard:200 x 100 dpi
Fine: 200 x 200 dpi
Photo: 200 x 200 dpi
Super Fine: 200 x 400 dpi
Ultra Fine: 400 x 400 dpi
|Fax Memory||Up to 256 pagesÂ¹|
|Speed dials||Max. 118 dials (including 18 one touch dials)|
|Group dials/destinations||Max. 117 dials / Max. 117 destinations|
|Sequential broadcast||Max. 119 locations|
|Memory backup||1 hour|
|Other Features||Dual Access, Remote Reception, PC Fax (TX only)|
|Scanner Type||Flatbed and Automatic Document Feeder (ADF)|
|Paper input (Standard)||250-sheet cassette
125-sheet multi-purpose tray
|Media types||Plain paper, Recycled paper, Heavy paper, Transparency, Label, Envelope|
A4, A5, B5, Legal, Letter, ExecutiveMulti-purpose tray:
A4, A5, B5, Legal, Letter, Executive, Envelope (COM10, Monarch, DL, ISO-C5)ADF:
A4, A5, B5, Legal, Letter, Custom sizes ( W x L): Max 215.9 mm x 355.6 mm , Min. 148 mm x 105 mm
|Media weights||Cassette: 60 to 105 g/mÂ²
Multi-purpose tray: 60 to 163 g/mÂ²
ADF: 60 to 163 g/mÂ²
INTERFACE & SOFTWARE
|Interface type||USB 2.0 Hi-Speed, 10BASE-T/100BASE-TX|
|Operating System compatibility||Windows 98/ Me/ 2000/ Server 2003/ XP/ Vista|
|Software and printer management||Presto!PageManager, ScanSoft OmniPage SE, NetSpot Device Installer, Remote User Interface (RUI)|
|Duty Cycle||Max. 30,000 pages per month|
|Warm-up Time||Approx. 60 seconds from power on|
|Control panel||20 characters x 2 lines backlit LCD|
|Dimensions with trays (W x D x H)||510 mm x 512 mm x 588 mm|
|Installation space (W x D x H)||510 mm x 916 mm x 840 mm|
|Weight||Approx 36 kg|
|Operating Environment||Temperature: 10 to 32ÂºC (50 to 86ÂºF)
Humidity: 10 to 80% RH (no condensation)
|Power source||220-240V(Â±10%) 50/60Hz (Â±2Hz)|
|Power Consumption||Maximum: Approx.1200 W
Standby: Approx. 35 W
Sleep mode: Approx. 8 W
Typical Electricity Consumption (TEC):2.200 kWh/week
|Noise Levels||Sound PressureÂ¹:
Active: 54 dB(A) or less
Standby: 35 dB(A) or less
|Cartridges||Cartridge 701 Black (5,000 pagesÂ¹)
Cartridge 701L Cyan (2,000 pagesÂ¹)Â²
Cartridge 701L Magenta (2,000 pagesÂ¹)Â²
Cartridge 701L Yellow (2,000 pagesÂ¹)Â²
Cartridge 701 Cyan – (4,000 pagesÂ¹)
Cartridge 701 Magenta – (4,000 pagesÂ¹)
Cartridge 701 Yellow – (4,000 pagesÂ¹)
Drum cartridge 701 â€“ (20000 pages mono / 5000 pages colourÂ¹)
Canon i-SENSYS MF8180C Driver & Software Installations
Manual instruction to install Canon i-SENSYS MF8180C Driver
As if you are about to use the printer, you have to set up the printer driver properly with all these steps below on your Windows operating system.
- The installation process of Canon i-SENSYS MF8180C can be started whenever the download is completed and you are ready to start the setting up. The first step just clicks and open the file directory where you save the downloaded file. The driver file name commonly ends with .exe.
- Double-click on the driver file or you can right-click on it to choose ?run as administrator? and then wait for several minutes while the driver files of Canon i-SENSYS MF8180C is being extracted. After the file extraction is done, just follow the next installation steps.
- The installation of software program will begin to set the Canon i-SENSYS MF8180C driver software package up and just do the following instruction shown on the computer screen to finish the setting.
- After done the following instruction, your Canon i-SENSYS MF8180C printing device is ready to be used.
Manual Instruction To Uninstall Canon i-SENSYS MF8180C Driver
To uninstall the Canon i-SENSYS MF8180C printing device from your Windows operating system, make sure you are following these steps below.
- Click the start menu on your Windows screen.
- Click on control panel icon or simply type ?control panel? down on the search column. There would be several icons there, and then click once on the ?programs? menu named ?uninstall an application?.
- On the list of installed application, search the Canon i-SENSYS MF8180C computer driver which is to be removed or simply type the application on search column.
- Double-click on the icon of Canon i-SENSYS MF8180C, and then click uninstall/change. To complete the uninstallation process, simply follow the instruction displayed on the screen.
Driver Download Or Installation Process For Mac Operating System:
How to install the driver of Canon i-SENSYS MF8180C in Mac:
- First, you need the file of the driver. When you have already completed the downloading process, it will be saved in the certain folder. You can see it at the computer settings.
- Second, you need to double click the downloaded driver file and mount it on the Disk Image.
- The third step is that you need to double click again the mounted Disk Image.
- At last, double clicking the packaged driver file. Do not worry, the installation is about to be started automatically.
However, the step-by-step of the installation (and vice versa), it can have differed depend on upon the platform or device that you use for the installation of Canon i-SENSYS MF8180C. The above mentioned, the installation is occurred using Windows 7 and Mac for Windows XP or Windows 8 is not the much different way.
canonprinterupdates.com provide a download link for Canon i-SENSYS MF8180C Series publishing directly from Canon website with easy-to-download, to get the download link can be found below.
|[Windows 32-bit & 64-bit] Patch for Network Scan, USB Scan Windows 10/8.1/8||2016004||7.7 MB||Download|
|MF8180C Fax Driver Mac OS X 10.5/10.6/10.7/10.8/10.9/10.10/10.11||4.9.0||24 MB||Download|
|Canon Fax Driver for Mac OS X 10.5/10.6/10.7/10.8/10.9/10.10/10.11||4.8.1||22 MB||Download|
|[Windows 64bit] i-SENSYS MF8180C MFDrivers (CARPS / FAX / ScanGear) Windows 10/8.1/8/7/Vista/Xp/Server 2003/2008||V3.01||10 MB||Download|
|[Windows 32bit] i-SENSYS MF8180C MFDrivers (CARPS / FAX / ScanGear) Windows 10/8.1/8/7/Vista/Xp/2000/Server 2003/2008||V3.01||17 MB||Download|
|MF Drivers (x64bit) Windows 7/Vista/Xp/Server 2003||3.01||20 MB||Download|
|MF Drivers Windows 7/Vista/Xp/2000/Server 2003||3.01||17 MB||Download|
|[Windows XP 32bit] Tool Box||4911mf17||10 MB||Download|
|[Windows 2000] Tool Box||4911mf12||6.1 MB||Download|
|[Windows 32bit] Tool Box Windows 10/8.1/8/7/Vista||4911mf18||9.5 MB||Download|
|MF Toolbox Windows 10/8.1/8/7/Vista/Xp (32 x64-bit)||v188.8.131.52.m||9.7 MB||Download|
|MF Toolbox for Windows 32/64bit Windows 8/7/Vista/XP||v184.108.40.206.m||9.8 MB||Download|
|NetSpot Device Installer for Windows 7/Vista/XP/2000/Server 2003/2008||v3.2.3(r32||4.5 MB||Download|
|NetSpot Device Installer for Windows Vista/XP/Me/2000 (32-bit)||v3.13(r313||7 MB||Download|
|MF Toolbox Windows Vista/XP/Me/2000 (32-bit)||220.127.116.11.mf||8.4 MB||Download|
|MF8180C User Guides||1.0||13 MB||Download|
Canon i-SENSYS MF8180C Free Download Full Driver & Software Package For Windows, Mac Os
Good news from the owner canonprinterupdates.com, thus those who look for the download link for all in one printer driver and full software of Canon i-SENSYS MF8180C, the download link is accessible, and no worry for broken link as any link for any platform works properly. While downloading the software, to ensure that there is nothing wrong while using Canon i-SENSYS MF8180C, you need to pay attention toward the installation or download user manual below.